 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| mitsubishi ? confidential (1/25) AA121TB01_02_00 tentative all information in this technical data sheet is tentative and subject to change without notice. 12.1? wxga technical specification AA121TB01 mitsubishi electric corp. date: dec.3,?07 preliminary
mitsubishi ? confidential (2/25) AA121TB01_02_00 contents ? ? no. ? item page -- cover 1 -- contents 2 1 application 3 2 overview 4 3 absolute maximum ratings 5 4 electrical characteristics 5, 6, 7 5 interface pin connection 8, 9 6 interface timing 10, 11, 12, 13, 14 7 block diagram 15 8 mechanical specification 16, 17 9 optical characteristics 18, 19, 20 10 reliability test condition 21 11 other feature 22 12 handling precautions for tft-lcd module 23, 24, 25 mitsubishi ? confidential (3/25) AA121TB01_02_00 1. application this specification applies to color tft-lcd module, AA121TB01. these specification papers are the proprietary product of mitsubishi electric corporation (?mitsubishi) and include materials protected under copyright of mitsubishi. no part of this document may be reproduced in any form or by any means without the express written permission of mitsubishi. mitsubishi does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a product specified in this document. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of mitsubishi or of others. mitsubishi classifies the usage of the tft-lcd module as follows. please confirm the usage before using the product. ? (1) standard usage computers, office equipment, factory auto mation equipment, test and measurement equipment, communications, transportation equipment(automobiles, ships, trains, etc.), provided, however, that operation is not influenced by tft-lcd directly. (2) special usage medical equipment, safety equipment, transpor tation equipment, provided, however, that tft-lcd is necessary to its operation. (3) specific usage cockpit equipment, military systems, aerospace equipment, nuclear reactor control systems, life support systems and any other equipment. mitsubishi should make a contract that stipulate apportionment of responsibilities between mitsubishi and our customer. the product specified in this document is designed for ?standard usage? unless otherwise specified in this document. if customers intend to use the product for applications other than those specified for ?standard usage?, they should first contact mitsubishi sales representative for it's intended use in writing. mitsubishi has been making continuous effort to improve the reliability of its products. customers should implement sufficient reliability design of their application equipments such as redundant system design, fail-safe functions, anti-failure features. mitsubishi assumes no responsibility for any damage resulting from the use of the product that does not comply with the instructions and the precautions specified in this document. please contact and consult a mitsubishi sales representative for any questions regarding this product. mitsubishi ? confidential (4/25) AA121TB01_02_00 2. overview AA121TB01 is 12.1? color tft-lcd (thin film transistor liquid crystal display) module composed of lcd panel, driver ics, control circuit, and backlight unit. by applying 6 bit or 8 bit digital data, 1280 800, 262k-color or 16.7m-color images are displayed on the 12.1? diagonal screen. input power voltage is 3.3v for lcd driving. the type of data and control signals are digital and transmitted via lvds interface per typ. 71 ? mhz clock cycle. inverter for backlight is not included in this module. general specifications are summarized in the following table: item specification display area (mm) 261.12 (h) 163.2 (v) (12.1-inch diagonal) number of dots 1280 3 (h) 800 (v) pixel pitch (mm) 0.204 (h) 0.204 (v) color pixel arrangement rgb vertical stripe display mode normally white tn number of color 262k(6 bit/color), 16.7m(8 bit/color) luminance (cd/m 2 ) (400) wide viewing angle technology optical compensation film viewing angle (cr 10) ? 80 80 (h), ? 60 80 (v) surface treatment anti-glare and hard-coating 3h electrical interface lvds (6 bit/8 bit) optimum viewing angle (contrast ratio) 6 o?clock module size (mm) 283.0 (w) 185.1 (h) 11.5 (d) module mass (g) (800) backlight unit ccfl, 2-tubes, edge-light, replaceable sign ?( )?represents preliminary value. characteristic value without any note is typical value. mitsubishi ? confidential (5/25) AA121TB01_02_00 3. absolute maximum ratings item symbol min. max unit power supply voltage for lcd vcc 0 4.0 v logic input voltage vi ? 0.3 vcc + 0.3 v lamp voltage vl 0 2000 vrms lamp current il 0 18 marms lamp frequency fl -- 80 khz operation temperature(panel) note 1,2) t op(panel) ? 20 70 c operation temperature(ambient) note 2) t op(ambient) ? 20 70 c storage temperature note 2) t stg ? 20 80 c [note] 1) measured at the center of active area and at the center of panel back surface 2) top,tstg 40 c : 90%rh max. without condensation top,tstg > 40 c : absolute humidity shall be less than the value of 90%rh at 40 c without condensation. 4. electrical characteristics (1) tft-lcd ambient temperature: ta = 25 ? item symbol min. typ. max. unit remarks power supply voltages for lcd vcc 3.0 3.3 3.6 v *1) power supply currents for lcd icc -- (550) (950) ma *2) permissive input ripple voltage vrp -- -- 100 mvp-p vcc = +3.3v high vih 2.0 -- vcc + 0.3 v mode, sc logic input voltage low vil 0 -- 0.8 v mode, sc *1) power and signals sequence: t1 10 ms 200 ms t4 0 < t2 50 ms 200 ms t5 0 < t3 50 ms 0 t6 t1 t2 t3 data 0.9vcc 0.9vcc 0.1vcc vcc t4 t5 t6 vl 0.1vcc 0.1vcc lcd power supply logic signal backlight power supply data: rgb data, dclk, dena, mode, sc mitsubishi ? confidential (6/25) AA121TB01_02_00 vcc-dip conditions: 1) when 2.6 v vcc < 3.0 v, td 10 ms 2) when vcc < 2.6 v vcc-dip conditions should also follow the power and signals sequence. td 2.6 v 3.0 v vcc *2) typical current condition: 64-gray-bar pattern(6 bit) 256-gray-bar pattern(8 bit) 800 line mode vcc = +3.3 v , f h =49.4 khz, f v =60 hz, f clk =71 mhz (2) backlight ta = 25 ? item symbol min. typ. max. unit remarks lamp voltage vl -- 540 -- vrms il = 13.0 marms lamp current il 6.0 (13.0) 15.0 marms *2),*6) ? lamp frequency fl 35 -- 80 khz *3) 975 -- -- ta = 25c 1150 -- -- ta = 0c starting lamp voltage vs 1240 -- -- vrms ta = ? 20c lamp life time lt 50000 -- -- h *4),*5), il = 13.0 marms continuous operation [note] *1) please use synchronous inverter. *2) lamp current measurement method (the current meter is inserted in low voltage line.) ctl cth cth lcd module inverter power supply a *3) lamp frequency of inverter may produce interference with horizontal synchronous frequency, and this may cause horizontal beat on the display. therefore, please adjust lamp frequency, and keep inverter as far from module as possible or use electronic shielding between inverter and module to avoid the interference. mitsubishi ? confidential (7/25) AA121TB01_02_00 *4) lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or when the starting lamp voltage does not meet the value specified in this table. *5) the life time of the backlight depends on the ambient temperature. the life time will decrease under low/high temperature. *6) please use the inverter which has symmetrical current wave form as follows, the degree of unbalance: less than 10% the ratio of wave height: less than 2 10% i ph i pl i ph : high side peak i pl : low side peak the degree of unbalance = |i ph - i pl | / irms 100(%) the ratio of wave height = i ph (or i pl ) / irms current wave form mitsubishi ? confidential (8/25) AA121TB01_02_00 5. interface pin connection (1) cn 1(interface signal) used connector: fi-se20p-hfe (jae) corresponding connector: fi-s20s[for discrete wire], fi-se20me[for fpc] (jae) function (isp 6 bit compatibility mode) pin no. symbol 6 bit input 8 bit input function (isp 8 bit compatibility mode) 1 vcc +3.3 v power supply 2 vcc +3.3 v power supply 3 gnd gnd 4 gnd gnd 5 link 0 ? r0, r1, r2, r3, r4, r5, g0 r2, r3, r4, r5, r6, r7, g2 r0, r1, r2, r3, r4, r5, g0 6 link 0+ r0, r1, r2, r3, r4, r5, g0 r2, r3, r4, r5, r6, r7, g2 r0, r1, r2, r3, r4, r5, g0 7 gnd gnd 8 link 1 ? g1, g2, g3, g4, g5, b0, b1 g3, g4, g5, g6, g7, b2, b3 g1, g2, g3, g4, g5, b0, b1 9 link 1+ g1, g2, g3, g4, g5, b0, b1 g3, g4, g5, g6, g7, b2, b3 g1, g2, g3, g4, g5, b0, b1 10 gnd gnd 11 link 2 ? b2, b3, b4, b5, dena b4, b5, b6, b7, dena b2, b3, b4, b5, dena 12 link 2+ b2, b3, b4, b5, dena b4, b5, b6, b7, dena b2, b3, b4, b5, dena 13 gnd gnd 14 clkin ? clock ? 15 clkin+ clock + 16 gnd gnd 17 link3 ? see: *2) r0, r1, g0, g1, b0, b1 r6, r7, g6, g7, b6, b7 18 link3+ see: *2) r0, r1, g0, g1, b0, b1 r6, r7, g6, g7, b6, b7 19 mode low=isp 6 bit compatibility mode high=isp 8 bit compatibility mode 20 sc scan direction control (low=normal, high=reverse) *1) the shielding case is connected with gnd. *2) recommended wiring of pin 17,18 (6 bit input) low data lvds transmitter 6 8 0 6 2 0 v cc 69 pin 17 pin 18 pin 17 pin 18 (2) cn 2(backlight) backlight-side connector: bhr-04vs-1 (jst) inverter-side connector: sm02(4.0)b-bhs(lf)(sn) (jst) pin no. symbol function 1, 2 cth vblh high voltage 4 ctl vbll low voltage ? ? ? ? ? [note] vblh-vbll = vl mitsubishi ? confidential (9/25) AA121TB01_02_00 (3) isp data mapping a. isp 6 bit compatibility mode(6 bit input) clkin+/- link0+/- 1clk link1+/- link2+/- r1 g0 r5 r4 r3 r2 r0 g2 b1 b0 g5 g4 g3 g1 b3 dena b5 b4 b2 clkin+/- link0+/- 1clk link1+/- link2+/- link3+/- r3 g2 r7 r6 r5 r4 r2 g4 b3 b2 g7 g6 g5 g3 b5 dena b7 b6 b4 r1 b1 b0 g1 g0 r0 b. isp 6 bit compatibility mode(8 bit input) clkin+/- link0+/- 1clk link1+/- link2+/- link3+/- r1 g0 r5 r4 r3 r2 r0 g2 b1 b0 g5 g4 g3 g1 b3 dena b5 b4 b2 r7 b7 b6 g7 g6 r6 c. isp 8 bit compatibility mode mitsubishi ? confidential (10/25) AA121TB01_02_00 6. interface timing lvds transmitter input signal (1) timing specifications item symbol min typ max unit frequency f clk 50 71 80 mhz dclk period t clk 12.5 14.1 20 ns active time t ha 1280 1280 1280 t clk blanking time t hb 20 160 -- t clk frequency f h 42.4 49.4 60 khz horizontal period t h 16.6 20.3 23.6 s active time t va 800 800 800 t h blanking time t vb 3 23 -- t h frequency f v 55 60 75 hz dena vertical period t v 13.3 16.7 18.2 ms [note] 1) dena (data enable) should always be positive polarity as shown in the timing specification. 2) dclk should appear during all invalid period. 3) lvds timing follows the timing specifications of lvds receiver ic: thc63lvdf84b(thine). 4) in case of blanking time fluctuation, please satisfy following condition. t vbn > t vbn-1 ? 3(t h ) mitsubishi ? confidential (11/25) AA121TB01_02_00 a. horizontal timing chart dclk data (r,g,b) dena 1 2 799 800 3 invalid data invalid data t vb line data dena t v a b. vertical timing chart 1 2 1279 1280 3 invalid data invalid data t hb first data last data t h =1/f h t v =1/f v t ha (2) timing chart mitsubishi ? confidential (12/25) AA121TB01_02_00 (3) color data assignment a. 6 bit input input data r data g data b data r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 color msb lsb msb lsb msb lsb black 00 0 0 000000000 0 0 000 red(63) 11 1 1 110000000 0 0 000 green(63) 0 0 0 0 0 0 1 1 11110 0 0 000 basic blue(63) 00 0 0 000000001 1 1 111 color cyan 00 0 0 001111111 1 1 111 magenta 11 1 1 110000001 1 1 111 yellow 11 1 1 111111110 0 0 000 white 11 1 1 111111111 1 1 111 red(1) 00 0 0 010000000 0 0 000 red(2) 00 0 0 100000000 0 0 000 red red(62) 11 1 1 100000000 0 0 000 red(63) 11 1 1 110000000 0 0 000 green(1) 0 0 0 0 0 0 0 0 00010 0 0 000 green(2) 0 0 0 0 0 0 0 0 00100 0 0 000 green green(62) 0 0 0 0 0 0 1 1 11100 0 0 000 green(63) 0 0 0 0 0 0 1 1 11110 0 0 000 blue(1) 00 0 0 000000000 0 0 001 blue(2) 00 0 0 000000000 0 0 010 blue blue(62) 00 0 0 000000001 1 1 110 blue(63) 00 0 0 000000001 1 1 111 [note] 1) definition of gray scale color (n) --- n indicates gray scale level. higher n means brighter level. 2) data 1:high, 0: low mitsubishi ? confidential (13/25) AA121TB01_02_00 b. 8 bit input input data r data g data b data r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 color msb lsb msb lsb msb lsb ? black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 basic green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 color blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 ? cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ? magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 ? yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 ? white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ? red(1) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? red(2) 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red ? ? ? red(255) 1 1 1 1 1 1 11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? green(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ? green(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 green ? ? ? ? ? green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 ? blue(1) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ? blue(2) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 blue ? ? ? blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 [note] 1) definition of gray scale color (n) --- n indicates gray scale level. higher n means brighter level. 2) data 1:high, 0: low mitsubishi ? confidential (14/25) AA121TB01_02_00 (4) display position and scan direction d(x,y) shows the data number of input signal for lcd panel signal processing pcb. sc: low ? ? ? ? ? ? ? ? ? ? ? ? ? sc: high d(1,1) d(1280,1) d(1,800) d(1280,800) cn2 d(1280,800) d(1,800) d(1280,1) d(1,1) cn2 mitsubishi ? confidential (15/25) AA121TB01_02_00 7. block diagram s2 timing controller tft-lcd drivers(gate) g1 g2 g800 timing signal display data s1 s3839 s3840 powe r drivers(source) i/f connector power supply circuit cn1 ccfl 1 2 4 cn2 mitsubishi ? confidential (16/25) AA121TB01_02_00 8. mechanical specifications (1) front side (unit: mm) mitsubishi ? confidential (17/25) AA121TB01_02_00 (2) rear side (unit:mm) mitsubishi ? confidential (18/25) AA121TB01_02_00 9. optical characteristics ta=25c, vcc=3.3v, input signals: typ. values shown in section 6 item symbol condition min typ max unit remarks ? contrast ratio cr v =0, h =0 390 600 -- -- *1)*2)*5) luminance lw v =0, h =0 300 (400) -- cd/m 2 *1)*5) luminance uniformity ? ? lw v =0, h =0 -- -- 30 % *1)*3)*5) tr v =0, h =0 -- 4 -- ms *1)*4)*5) ? response time ? tf v =0, h =0 -- 12 -- ms *1)*4)*5) horizontal h ? 70 70 ? 80 80 -- *1)*5) vertical v cr 10 ? 50 70 ? 60 80 -- *1)*5) horizontal h ? 70 70 ? 80 80 -- *1)*5) ? viewing ? angle vertical v cr 5 ? 70 70 ? 80 80 -- *1)*5) image sticking tis 2 h -- -- 2 s *6) ? rx (0.543) (0.573) (0.603) ? red ry (0.299) (0.329) (0.359) color gx (0.298) (0.328) (0.358) coordinates green gy v =0, h =0 (0.506) (0.536) (0.566) -- *1)*5) ? bx (0.131) (0.161) (0.191) ? blue by (0.127) (0.157) (0.187) ? wx (0.283) (0.313) (0.343) ? white wy (0.299) (0.329) (0.359) [note] these items are measured using cs1000(minolta) for color coordinates, ezcontrast(eldim) for viewing angle and cs1000 or bm-5a(topcon) for others under the dark room condition (no ambient light) after more than 30 minutes from turning on the lamp unless noted. condition: il = (13.0) marms, fl= 55 khz measurement method for luminance and color coordinates is as follows. (field) tft-lcd module photodetector luminance : =2 ? (bm-5a) color coordinates : =1 ? (cs1000) 500 mm the luminance is measured according to flat panel display measurements standard (vesa standard). mitsubishi ? confidential (19/25) AA121TB01_02_00 *1) measurement point contrast ratio, luminance, response time, viewing angle, color coordinates: display center luminance uniformity: point 1 5 shown in a figure below (1,1) 320 640 960 200 400 600 (1280,800) 2 4 5 3 1 *2) definition of contrast ratio cr= luminance with all white pixels / luminance with all black pixels *3) definition of luminance uniformity ? lw=[lw(max)/lw(min)-1] 100 *4) definition of response time white 90% 90% 10% 10% black tf tr luminance *5) definition of viewing angle ( v , h ) upper(+) lower(-) left (-) right (+) lcd panel v normal axis mitsubishi ? confidential (20/25) AA121TB01_02_00 *6) image sticking: continuously display the test pattern shown in the figure below for two-hours. then display a completely white screen. the previous image shall not persist more than two seconds at 25c. black lines white area cols 638-642 rows 398-402 test pattern for image sticking test mitsubishi ? confidential (21/25) AA121TB01_02_00 10. reliability test condition ? (1) temperature and humidity test item conditions high temperature high humidity operation 40c, 90%rh, 240 ? h (no condensation) high temperature operation 70c, 240 h low temperature operation ? 20c, 240 h high temperature storage 80c, 240 h low temperature storage ? 20c, 240 h thermal shock (non-operation) ? between ? 20c (1h) and 80c(1h), 100 cycles (2) shock & vibration item conditions shock (non-operation) shock level: 1470 m/s 2 (150g) waveform: half sinusoidal wave, 2 ms number of shocks: one shock input in each direction of three mutually perpendicular axes for a total of six shock inputs vibration (non-operation) vibration level: 9.8 m/s 2 (1.0g) waveform: sinusoidal frequency range: 5 to 500 hz frequency sweep rate: 0.5 octave /min duration: one sweep from 5 to 500 hz in each of three mutually perpendicular axis(each x,y,z axis: 1 hour, total 3 hours) (3) judgment standard the judgment of the above tests should be made as follow: pass: normal display image, no damage of the display function. (ex. no line defect) partial transformation of the module parts should be ignored. fail: no display image, damage of the display function. (ex. line defect) mitsubishi ? confidential (22/25) AA121TB01_02_00 11. other feature this lcd module complies with rohs *) directive. *) rohs: restriction of the use of certain hazardous substances in electrical and electronic equipment mitsubishi ? confidential (23/25) AA121TB01_02_00 12. handling precautions for tft-lcd module ? please pay attention to the followings in handling tft-lcd products; (1) assembly precaution a. please mount the lcd module by using mounting hole with a screw clamping torque less than 0.5 nm. please do not bend or wrench the lcd module in assembling. please do not drop, bend or twist the lcd module in handling. b. please design display housing in accordance with the following guide lines. (a) housing case must be designed carefully so as not to put stresses on lcd all sides and not to wrench module. the stresses may cause non-uniformity even if there is no non-uniformity statically. (b) keep sufficient clearance between lcd module back surface and housing when the lcd module is mounted. approximately 1.0mm of the clearance in the design is recommended taking into account the tolerance of lcd module thickness and mounting structure height on the housing. (c) when some parts, such as, fpc cable and ferrite plate, are installed underneath the lcd module, still sufficient clearance is required, such as 0.5mm. this clearance is, especially, to be reconsidered when the additional parts are implemented for emi countermeasure. (d) design the inverter location and connector position carefully so as not to give stress to lamp cable, or not to interface the lcd module by the lamp cable. (e) keep sufficient clearance between lcd module and the others parts, such as inverter and speaker so as not to interface the lcd modu le. approximately 1.0mm of the clearance in the design is recommended. (f) to avoid local elevation/decrease of temperature, considering location of heating element, heat release, thermal design should be done. c. please do not push or scratch lcd panel surface with anything hard. and do not soil lcd panel surface by touching with bare hands. (polarizer film, surface of lcd panel is easy to be flawed.) d. please do not press any parts on the rear side such as source tcp, gate tcp, control circuit board and fpcs during handling lcd module. if pressing rear part is unavoidable, handle the lcd module with care not to damage them. e. please wipe off lcd panel surface with absorbent cotton or soft cloth in case of it being soiled. f. please wipe off drops of adhesives like saliva and water on lcd panel surface immediately. they might damage to cause panel surface variation and color change. g. please do not take a lcd module to pieces and reconstruct it. resolving and reconstructing modules may cause them not to work well. h. please do not touch metal frames with bare hands and soiled gloves. a color change of the metal frames can happen during a long preservation of soiled lcd modules. i. please handle metal frame carefully because edge of metal frame is very sharp. mitsubishi ? confidential (24/25) AA121TB01_02_00 j. please pay attention to handling lead wire of backlight so that it is not tugged in connecting with inverter. k. please connect the metal frame of lcd module to gnd in order to minimize the effect of external noise and emi. l. be sure to connect the cables and the connecters correctly. (2) operating precautions a. please be sure to turn off the power supply before connecting and disconnecting signal input cable. b. please do not change variable resistance settings in lcd module. they are adjusted to the most suitable value. if they are changed, it might happen lcd does not satisfy the characteristics specification. c. lcd backlight takes longer time to become stable of radiation characteristics in low temperature than in room temperature. d. the interface signal speed is very high. please pay attention to transmission line design and other high speed signal precautions to satisfy signal specification. e. a condensation might happen on the surface and inside of lcd module in case of sudden change of ambient temperature. f. please pay attention not to display the same pattern for very long time. image might stick on lcd. even if image sticking happens, it may disappear as the operation time proceeds. g. please obey the same safe instructions as ones being prepared for ordinary electronic products. (3) precautions with electrostatics a. this lcd module use cmos-ic on circuit board and tft-lcd panel, and so it is easy to be affected by electrostatics. please be careful with electrostatics by the way of your body connecting to the ground and so on. b. please remove protection film very slowly from the surface of lcd module to prevent from electrostatics occurrence. (4) storage precautions a. please do not leave the lcds in the environment of high humidity and high temperature such as 60c90%rh. b. please do not leave the lcds in the environment of low temperature; below ?20c. (5) safety precautions a. when you waste damaged or unnecessary lcds, it is recommended to crush lcds into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. mitsubishi ? confidential (25/25) AA121TB01_02_00 b. if any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off thoroughly with soap and water. c. be sure to turn off the power supply when inserting or disconnecting the cable. d. inverter should be designed carefully so as not to keep working in case of detecting over current or open circuit on the lamp. (6) others a. a strong incident light into lcd panel might cause display characteristics changing inferior because of polarizer film, color filter, and other materials becoming inferior. please do not expose lcd module direct sunlight and strong uv rays. b. please pay attention to a panel side of lcd module not to contact with other materials in preserving it alone. c. for the packaging box, please pay attention to the followings; (a) packaging box and inner case for lcd are designed to protect the lcds from the damage or scratching during transportation. please do not open except picking lcds up from the box. (b) please do not pile them up more than (7) boxes. (they are not designed so.) and please do not turn over. (c) please handle packaging box with care not to give them sudden shock and vibrations. and also please do not throw them up. (d) packaging box and inner case for lcds are made of cardboard. so please pay attention not to get them wet. (such like keeping them in high humidity or wet place can occur getting them wet.) |
Price & Availability of AA121TB01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |